In Dubai, pressure washing a residential driveway typically costs AED 150–1,400 per job, while patio and pool deck cleaning usually costs AED 4–18 per square metre. Facade cleaning is priced separately at AED 10–40 per square metre, depending on height, material and access. Most contractors apply a minimum visit charge of around AED 250–350, meaning small jobs often cost more than the basic area rate suggests.
The final price depends less on the machine and more on the surface, access and level of dirt. To budget accurately, it helps to understand what drives the quote, how different surfaces are priced and when specialist equipment or treatment may be necessary.
This guide explains typical pressure washing costs for Dubai villas and residential properties, including driveways, patios, pool decks and exterior walls.
Pressure Washing Prices in Dubai at a Glance
Use these typical price ranges as an initial budgeting guide. The final quotation will depend on the property’s condition, cleaning method and the work included.
- Residential driveways: AED 150–1,400 per job
- Typical villa driveway: AED 400–700
- Patios and pool decks: AED 4–18 per m²
- Cold-water surface cleaning: AED 4–10 per m²
- Hot-water or chemical treatment: AED 8–18 per m²
- Facade cleaning: AED 10–40 per m²
- Small 2–3 bedroom villa exterior: AED 500–1,200
- Large 5-bedroom villa exterior: AED 1,800–3,500
- Minimum visit charge: AED 250–350
How Much Does Driveway Pressure Washing Cost?
Driveways are among the most common pressure washing jobs for Dubai villas, but quotations can vary considerably. A standard concrete or interlock driveway with light dust and sand usually costs less than a surface covered in oil stains, tyre marks or algae.
For a typical Dubai villa driveway, expect to budget around AED 400–700 for a thorough clean. Long-standing oil stains, cement dust from nearby construction and heavily soiled areas may push the price towards the upper end of the range.
- Light dust and loose sand
- Oil and grease stains
- Tyre marks and traffic residue
- Algae in shaded areas
- Cement dust and construction residue
- Interlock pavers requiring careful pressure control
Interlock paving needs an appropriate pressure setting to avoid dislodging the joint sand. Some contractors may recommend re-sanding after cleaning, so check whether this is included or charged separately.
Patio and Pool Deck Pressure Washing Prices
Patios and pool decks are often priced per square metre because they typically form larger, continuous surfaces. The rate depends on the material, the amount of dirt and whether cold water alone is sufficient or additional treatment is required.
For a typical villa patio measuring 30–50 m², the indicative cost could range from approximately AED 120–900, depending on the cleaning method, condition and contractor’s minimum charge.
- Cold-water cleaning for ordinary dust
- Hot-water treatment for stubborn residue
- Algae and mould removal in shaded corners
- Cleaning around outdoor furniture and planters
- Pool deck cleaning that preserves non-slip texture
- Additional treatment for slippery surface films
Pool decks need particular care because moisture and sunscreen residue can contribute to slippery films. The cleaning method should remove contamination without damaging the surface’s non-slip finish.
How Much Does Villa Facade Cleaning Cost?
Facade cleaning is one of the most variable pressure washing services because height and access can significantly affect the work involved. A single-storey villa that can be cleaned from ground level is very different from a three-storey exterior that requires specialist access equipment.
For a general budgeting estimate, a small 2–3 bedroom villa exterior clean may cost AED 500–1,200. A larger five-bedroom villa can reach AED 1,800–3,500 when the scope includes the facade, windows and driveway together.
- Single-storey walls accessible from the ground
- Multi-storey facades requiring access equipment
- Painted render requiring controlled pressure
- Delicate natural stone finishes
- Bare concrete surfaces
- Combined facade, window and driveway cleaning
Surface material matters as much as height. Painted render and delicate stone may require lower pressure or soft washing, while some bare concrete surfaces can tolerate more intensive cleaning. Using the wrong method can etch stone or strip paint.
What Factors Affect Pressure Washing Prices?
Per-square-metre rates are a starting point rather than a final quotation. Several practical factors can change the total cost of cleaning a Dubai property.
- Surface Type and Condition — Concrete can generally tolerate more pressure than painted walls, timber decking or delicate stone. Neglected surfaces may require additional time, cleaning products or repeat treatment compared with surfaces maintained regularly.
- Access and Height — Ground-level driveways and patios are relatively straightforward. Rooftops, upper-storey facades and narrow side passages may require ladders, extension poles or specialist safety equipment, increasing the cost.
- Cleaning Frequency and Contracts — A one-off deep clean may cost more per visit than a scheduled maintenance arrangement. Regular cleaning can prevent heavy buildup and make subsequent visits easier. If you need driveway and patio cleaning every six months, ask whether a maintenance plan offers a lower visit rate.
- Water Supply and Drainage — Most villas have a water source and drainage, but some jobs require additional arrangements. Water delivery or careful runoff management around swimming pools, plants and neighbouring areas may add to the quotation.
- Minimum Visit Charges — Many providers apply a minimum charge of approximately AED 250–350 to cover transport, equipment and labour. This means that cleaning a small balcony or short pathway may cost the same as a larger job’s minimum service fee.
Should You Pressure Wash Your Property Yourself?
Pressure washing can look simple, but the wrong nozzle, pressure setting or technique can cause damage that costs more to repair than the cleaning itself. Painted render can lose its finish, interlock joint sand can be displaced and timber decking can splinter.
A rented machine may be suitable for a ground-level concrete driveway or a standard patio with light soiling, provided you test a small, inconspicuous area first and use an appropriate pressure setting.
- DIY may suit: Simple, ground-level concrete surfaces with light dirt
- Professional help is advisable: Multi-storey facades and difficult access
- Professional help is advisable: Interlock paving where joint sand must be protected
- Professional help is advisable: Pool decks with specialist non-slip finishes
- Professional help is advisable: Deep oil stains requiring suitable treatment
- Professional help is advisable: Delicate stone, painted surfaces and timber
A specialist can assess the surface, select an appropriate cleaning method and manage runoff. For villa owners who want the job completed without guessing which pressure setting is safe, professional service can reduce the risk of damage and incomplete cleaning.
Explore Pressure Washing & Jet-Wash Services for Villas and Properties in Dubai to discuss the requirements of your property.
What to Include When Requesting a Quote
A reliable quotation should reflect the actual job rather than a generic rate. Before contacting a provider, prepare a few details to help them assess the work accurately.
- Photos: Take clear pictures of the full area from a standing position, not just close-ups of stains.
- Surface material: Identify the material if possible, such as concrete, interlock, stone or painted render.
- Approximate dimensions: Provide the area in square metres or the approximate size of your villa.
- Specific stains: Mention oil, algae, rust, paint or cement residue that may need additional treatment.
- Access details: Explain parking restrictions, gates, narrow passages and other obstacles.
When quotations arrive, compare the work included rather than looking at the total price alone.
- Is oil-stain pre-treatment included?
- Is interlock re-sanding included or charged separately?
- Is VAT included in the quoted price?
- Are access equipment and height-related costs included?
- Are water supply and runoff management covered?
Need a pressure washing quote for your villa?
Share details of your driveway, patio or facade to help establish a quotation based on the actual surface, condition and access requirements.
Frequently Asked Questions
How much does pressure washing cost per square metre in Dubai?
Standard cold-water surface cleaning typically ranges from AED 4–10 per square metre. Hot-water cleaning or jobs requiring chemical pre-treatment may cost AED 8–18 per square metre. Facade cleaning is commonly priced separately at AED 10–40 per square metre, depending on height, access and material. Actual rates vary by provider and job conditions.
Can pressure washing damage interlock paving?
Yes. Excessive pressure can dislodge joint sand and destabilise paving. The contractor should use an appropriate nozzle and pressure setting and may recommend re-sanding the joints after cleaning.
How often should a Dubai villa driveway be pressure washed?
Many driveways and walkways benefit from cleaning around twice a year. Properties near construction sites or unpaved roads may need more frequent attention. Facades and patios may benefit from annual cleaning, depending on dust, shade, moisture and surface condition.
Can pressure washing remove old oil stains?
Fresh oil stains often respond well to suitable degreasing pre-treatment followed by pressure washing. Deeply embedded stains may improve significantly but can leave a faint mark. Severe staining should be discussed separately when requesting a quote.
Why do pressure washing companies charge a minimum fee?
A minimum visit charge helps cover crew time, transport, equipment and setup. If the minimum is AED 250–350, a small balcony or pathway may cost that amount even when the measured area is very small.
What information do I need to get an accurate quote?
Provide clear photographs, the surface material, approximate dimensions, details of stains and any access restrictions. Ask whether pre-treatment, re-sanding, VAT and access equipment are included in the final price.
Final Thoughts
Pressure washing prices in Dubai vary according to the surface, its condition, the cleaning method and how easily the contractor can reach the area. Driveways may cost a few hundred dirhams, while larger villa exteriors and complex facade jobs can require a considerably higher budget.
Before booking, compare the scope of work, confirm any minimum visit charge and ask how the contractor will protect your property’s surfaces. Clear photos and accurate measurements can help you obtain a more realistic quotation.
For specialist help with your driveway, patio, pool deck or facade, explore MAINTAINED’s pressure washing and jet-wash services in Dubai.
Get a quote for your Dubai property
Arrange pressure washing for your driveway, patio or facade with a quote based on the actual cleaning requirements.